Bold shows settings that require changes in Unit 2.
Modulator Menu
Menu Title |
Unit 1 |
Unit 2 |
Country |
U.K |
U.K |
Channel |
CH60 |
CH49 |
Freq (Khz) |
786000 |
698000 |
BW (MHz) - Bandwidth |
8 |
8 |
Constellation |
64QAM |
64QAM |
FEC - Forward Error Correction |
7/8 |
7/8 |
FFT - Fast Fourier Transform |
8K |
8K |
Guard in - Guard Interval |
1/32 |
1/32 |
RF out - Power Output |
-30 dBm |
-30 dBm |
Stream Menu
Menu Title |
Unit 1 |
Unit 2 |
TSID - Transport Stream ID |
1001 |
1002 |
ONID - Original Network ID |
2001 |
2001 |
Network ID |
30001 |
30002 |
Net. Name |
Our Network |
Our Network |
Program ID |
4001 |
4002 |
Program Name |
SBox |
Sbox 1 |
Provider |
Provider1 |
Provider1 |
LCN - Logical Channel Number |
0401 |
0402 |
PMT PID - Program Map Table Packet Identification |
5001 |
5002 |
Video PID - Video Packet Identification |
6001 |
6002 |
Audio PID - Audio Packet Identification |
7001 |
7002 |
Bitrate |
10 Mbit/s |
10 Mbit/s |
Once the above settings have been altered then install the modulators using the below configuration, we recommend following the below steps;
1.Install Unit 1 to the system (including the TV aerial)
2.Tune the TV
3.Install Unit 2
4.Tune the TV again