Configuration & Operation > PTZ Module Menu

IMPORTANT NOTE - The camera module provides a separate menu that may help resolve specific issues.

Options generally set in the Main PTZ OSD Menu detailed previously, interface with the camera module. Therefore some options if changed, could result in a loss of communication between the main menu and the camera module. Some of these settings are locked and are not changeable.

If changes are made incorrectly can lead to an unusable system. Proceed at your own risk.

There is a further menu system in the PTZ camera module. This can be accessed using the steps below;

1.Select the <GO TO/ Call preset > Preset 91

2.Select the <GO TO/ Call preset > Preset 80

Controls

Zoom – moves down the menu

Zoom + moves up the menu

Focus + enters menu settings moves left – decreases settings

Focus - exits submenu settings moves right – increases value