<< Click to Display Table of Contents >> Navigation:  Network Settings > Set ONVIF

 

If you need to access to the device through ONVIF protocol, you can configure the ONVIF user to enhance the network security.

 

Steps

1. Go to Configuration → Network → Advanced Settings → Integration Protocol.

2. Check Enable Open Network...

3. Click Add to configure the ONVIF user.

 

Delete        Delete the selected ONVIF user.

 

Modify        Modify the selected ONVIF user.

 

4. Click Save.

5. Optional: Repeat the steps above to add more ONVIF users.