<< Click to Display Table of Contents >> Navigation:  System and Security > Authentication > Set IP Address Filter

 

IP address filter is a tool for access control. You can enable the IP address filter to allow or forbid the visits from the certain IP addresses.

 

IP address refers to IPv4.

 

Steps

1. Go to Configuration → System → Security → IP Address Filter.

2. Check Enable IP Address Filter.

3. Select the type of IP address filter.

 

 

 

Forbidden        IP addresses in the list cannot access the device.

 

Allowed        Only IP addresses in the list can access the device.

 

4. Edit the IP address filter list.

 

Add        Add a new IP address to the list.

 

Modify        Modify the selected IP address in the list.

 

Delete        Delete the selected IP address in the list.

 

5. Click Save.