System and Security > Authentication

HTTPS is a network protocol that enables encrypted transmission and identity authentication, which improves the security of remote access.

Steps

1. Go to Configuration → Network → Advanced Settings → HTTPS.

2. Check Enable.

3. Click Delete to recreate and install certificate.

Create and install

self-signed certificate

Refer to Create and Install Self-signed Certificate

Create certificate request and install certificate

Refer to Install Authorized Certificate

4. Click Save.

Create and Install Self-signed Certificate

Steps

1. Check Create Self-signed Certificate.

2. Click Create.

3. Follow the prompt to enter Country, Hostname/IP, Validity and other parameters.

4. Click OK.

Result

The device will install the self-signed certificate by default.

Install Authorized Certificate

If the demand for external access security is high, you can create and install authorized certificate via HTTPS protocol to ensure the data transmission security.

Steps

1. Select Create certificate request first and continue the installation.

2. Click Create.

3. Follow the prompt to input Country, Hostname/IP, Validity and other parameters.

4. Click Download to download the certificate request and submit it to the trusted authority for signature.

5. Import certificate to the device.

– Select Signed certificate is available, start the installation directly. Click Browse and Install

to import the certificate to the device.

– Select Create the certificate request first and continue the installation. Click Browse and

Install to import the certificate to the device.

6. Click Save.

Set HTTPS

Set HTTPS