<< Click to Display Table of Contents >> Navigation:  Temperature Measurement > Notice

 

This part introduces the notices of configuring temperature measurement function.

•The target surface should be as vertical to the optical axis as possible. It is recommended that the angle of oblique image plane should be less than 45°.

•The target image pixels should be more than 5 × 5.

•If multiple presets will be taken for temperature measurement, it is recommended to set the patrol time above 20 s.

•Please select line thermography or area thermography for a certain area temperature measurement. The point thermography is not recommended in case of deviation occurred during device movement to affect the accuracy of temperature measurement.