Configuration > Getting Started

Image processing and analysis is all done in the camera, this software behaves as though it was a 'LAN relay' hence receives via TCP/IP the user definable text that would otherwise be sent to the relay.

The action relay can be triggered subject to vehicles detected in the black/ white list or grey (unknown) vehicles.

For this to happen, the camera must be configured correctly.

These links provide document how to setup a camera ...

https://systemq.com/PDF/manual/xROBOPCZ22.pdf

https://systemq.com/PDF/manual/xROBOPMZ50.pdf

Crucially, these minimum steps must be performed in the camera ...

•Device Activation - See the camera manual

•NTP - See the camera manual

•Network - See the camera manual

•ANPR - Basic Settings - See the camera manual

•ANPR - Schedule (not required if using 7x24hr) - See the camera manual

•ANPR - B&W List (not required if solely using grey number plates) - See the camera manual

•ANPR - Action - See Action - LAN Relay