Programming > Adding a Card or Fob > Adding using the Admin Pin

In admin mode:-

Press 1nnn#(single beep) swipe card or fob (double beep).

To add multiple cards do not press 1 again just enter nnn# (single beep) swipe card or fob (double beep).

4 beeps indicates that it has failed.

Don't forget if the unlock mode is set to card or fob and PIN then a PIN will have to be added for each card or fob. The user can do this themselves as this is not done in admin mode. See Adding a PIN to a Card or Fob.

Note: nnn = User No. between 001 and 199.

If a record is kept of the user and the User No. then the card or fob can be deleted using the user No. else the card or fob will be needed to delete it from the VDP103.

This is a handy way to remove lost cards or fobs from the system without having to delete them all.