Can be setup to trigger recording to the SD card in the monitors connected and also be reviewed later as a notification from the menu.
1. From the menu select Settings
2. Go to Door Cams / CCTV Cams
3. Select Channel
4. Set Motion Detection to ON
Motion Sensitivity - Adjustable Low, Medium and High
Motion Record Time - Adjustable 10s - 20s , 40s, 60s, 80s, 100s, 120s, 140s, 160s, 180s, 200s, 220s, 240s, 260s, 280s, 300s
All Motion Events will then be displayed as a notification from the main screen which can be played back.
NOTE
Motion will only trigger and record an event on 1 channel at a time. For example, If Door Cam 1 is triggered and recording motion and Door Cam 2 is also triggered, then only Door Cam 1 will record the motion event. i.e simultaneous recording from multiple cameras is not possible, as the first event is the event which is logged.