<< Click to Display Table of Contents >> Navigation:  Setup Considerations > Relay Delay (01-99 secs)

The relay delay feature can be set from 1 second all the way up to 99 seconds and will delay ALARM OUTPUT from triggering again.

 

This delay period is simply altered using the Remote control. Press the mode button and enter the number of seconds you require as a delay on the keypad. The PIR light will then flash red 5 times to indicate it has been updated. The default setting is 10 seconds.

 

Eg. for a 45 second delay enter Mode > 45

 

This will inhibit the alarm output trigger from activating again during that period.