Status Icons
In Live View mode there are icons at the bottom of each camera image showing the current status of the camera and/or the recorder as described below:
Icon |
Channel Status |
|---|---|
|
The camera channel is recording |
|
The camera has detected motion but the channel is not recording |
|
The camera has detected motion and is the channel now recording |
|
The I/O alarm external sensor has been triggered but the channel is not recording |
|
The I/O alarm external sensor has been triggered and is the channel now recording |
|
The Smart Option sensor has been triggered but the channel is not recording |
|
The Smart Option sensor has been triggered and is the channel now recording |
|
The recorder cannot detect a HDD or the HDD is not formatted |
Channel Status
Sometimes you may see a message instead of the camera's image. The possible messages and their meanings are shown below:
•Video Loss: Displays when connection to the camera has been lost.
•Off-Line: The previously added IP camera is off line or disconnected.
•No Camera: IP camera has not been connected to the recorder.
•No HDD: There is no hard drive installed or the recorder can not detect the hard drive.