UTC also known as Up The Coax or Coaxitron allows you to adjust the zoom and focus on compatible motorised varifocal lens cameras. You can also configure the menu settings too.
Camera Selection
You can select which camera you want to control from the Camera drop down list.
Protocol
You can choose which UTC standard is used for sending commands to the camera from the Protocol drop down list. COAX1 is the protocol used by our Zip CCTV cameras and is the most widely used. However, if you have a UTC compatible camera which doesn't appear to respond to commands try switching COAX2. This is a less common standard but maybe required for some third party cameras.
UTC Controls Explained
The buttons in the left hand panel are used to zoom and focus the camera as well as configuring the camera's menu settings as explained below.
Icon |
Name |
Function |
|---|---|---|
|
Zoom |
Up and Down arrows zoom in and out respectively. Most motorised lens cameras have auto focus which should occur automatically after you adjust the zoom. |
|
Focus |
You can use the Left and Right arrows to manually focus the camera. |
|
Menu / Confirm |
The Centre button is used to display the camera's menu system and to confirm selections once in the menu system. |
