Frequently Asked Questions

My IPmitter is not pairing, what should I do?
1. Check the signal strength on the LED display at the Host and Client IPmitter. Between P-070 and P-095 is too low for transmission > Try the pairing process with the devices closer together.

2. Check the SYS light at the Host and Client IPmitter > If the SYS light is not lit then check your 48V PoE source or 12V DC source.

3. Check the WAN or LAN indicator Host and Client IPmitter > This will light up if a device connected and powered correctly. Please note this may not just be a power issue for the device connected but the cable connecting the IPmitter and the devices may be wired incorrectly or the cable may have a fault.

Last Updated 3 years ago

Please Wait!

Please wait... it will take a second!