We have a wide range of plugs and sockets for terminating your cables when connecting up you CCTV equipment. We also have adaptors in every variety to help you overcome any tricky obstacles you may encounter.
Alternatively, even though we can supply all the relevant connectors to make up your own CCTV, video and power leads, buying a pre-made lead can save you an awful lot of time simply by having them as spares in the back of your van. The selection below covers most CCTV and AV configurations that you might require in your day to day workload.
A range of products from the best-selling RapidFit brand including connectors and tools. It's the way to fit an RJ45 in less than minute!
Quality pre-moulded BNC-BNC (plug) leads in a range of lengths from 20cm to 20m.
Variety of BNC plugs in different style depending on your preference - Crimp on, twist-on, screw terminal.
Practical range of BNC adaptors and couplers to convert BNC or Phono plugs & sockets.
Useful range of HDMI leads and adaptors ideal for connecting up CCTV recorders with screens or for general use with TVs.
Pre-made patch leads with extra long lengths up to 100m, perfect for networking & CCTV jobs! Great value in choice of colours and lengths.
Full range of RJ45 plugs and adaptors for terminating or connecting CAT5 and CAT6 cables. Handy for IP CCTV usage.
Handy for connecting up power supply units to equipment or extending the length of their lead reach. Also includes our best selling easy to fit Zulug DC connector range.
Phono leads & connectors that are the standard connection for an audio signal but are sometimes used for video too.
Popular USB leads can be use for connecting CCTV or computer equipment.
Connectors commonly found on older TVs, displays and AV equipment usually that predate the introduction of HDMI.
Time saving CAT5 plugs with unique open ended design, easy to see wire order. (Requires a RapidFit crimp tool)
The same design as our standard 3 piece BNC crimps just made to a higher standard for the best results.
These RJ45 boots create a hard extension on the end of your connectors. The tough polycarbonate build means that they prevent the cable from bending at the point of termination.
Great for connecting recorders to monitors.
Easy fit plugs requiring no special tools for making off RG59 cable ends for connecting to a DVR or monitor.
Ideal for rack-mount equipment or when space is tight, created to make a standard BNC plug into a right angled one.
Adaptor for converting a Phono plug used as a video out connection on many CCTV devices into a BNC plug.
Another T-piece for splitting a video into 2 signals. With 3 BNC sockets, itís ideal for connecting up 3 BNC leads.
These BNC couplers provide a fast way of connecting 2 BNC leads or plugs in-line.
Converts a BNC plug into a phono plug, ideal for plugging into SCART adaptors and AV equipment.
Unusual BNC Plug-Plug adaptor that converts a BNC socket (female) into a BNC plug (male).
This T-piece quickly splits a BNC Video signal into two outputs for fast splitting of the signal into 2 devices.
Handy multi-purpose BNC plug with screw terminal connection ideal for CAT5/6 or alarm cable. The right angle options are great for tight spaces.
Traditional 2.1mm DC Plug commonly used for powering 12V DC cameras. Requires soldering.
2.1mm DC Socket commonly found on the end of a 12V CCTV camera lead. Requires soldering.
A great way to extend the lead on a typical PSU. Available in 3 configurations.
The fastest way to make up a 2.1mm DC plug and lead. Simply wire 0 and 12V and it's done!
A fast way to make up a 2.1mm DC socket lead with multi-core cables such as CAT 5 or alarm cable.
This easy to wire Zulug is a fast way to make a BNC plug on a multi-core cable such as CAT5 or alarm.
There's a RapidFit RJ45 plug for both CAT 5 and CAT6 cable in UTP or STP versions too.
More information for the general public at our website: rapidfitcctv.com
© 2022 Systemq.com, all rights reserved worldwide.