If you want to link two location together on a network and cabling is impossible or not economic then wireless bridges are a great choice allowing you to a network signal from one building to another or for example IP CCTV from your garden office to your house.
Our budget IPmitters have a data transfer rate of 300Mbs, using the 2.4Ghz band, this is aimed at cost conscious installations.
The Standard IPmitters have a faster data transfer rate of 450Mbps and uses the less crowded 5.8GHz band so is less likely to be fighting for airspace in areas that have a lot of WiFi equipment. **OFFER** Spend over £300 ex-vat on IPmitter branded products and get a free patch lead bundle worth £28!!
These are the top of the range IPmitter bridges and boast an ultra fast 900Mbs data rate and also uses the 5.8GHz band for a less crowded airspace footprint. The 1Gig LAN port also makes this model more suitable for multiple IP camera transmission. **OFFER** Spend over £300 ex-vat on IPmitter branded products and get a free patch lead bundle worth £28!!
The IPmitter ceiling and wall access point (IPMIT100) boasts dual band technology and can simultaneously connect equipment to your LAN on both the 5.8Ghz and 2.4Ghz channels. **OFFER** Spend over £300 ex-vat on IPmitter branded products and get a free patch lead bundle worth £28!!
Ideal for pole mounting CCTV equipment such as the IPmitter wireless bridges and antennas.
Below are a list of product manuals and quick start guides covering our IPmitter wireless bridges and wireless access point range.
The above manuals cover the following models: IPMIT100
The above manual covers the following models: IPMIT204 / IPMIT254
The above manual covers the following models: IPMIT304 / IPMIT354
The above manual covers the following models: IPMIT430 / IPMIT460
Budget 24V PoE Wireless Bridges - Full Manual (PDF)
The above manual covers the following models: IPMIT200 / IPMIT250
Standard 24V PoE Wireless Bridges - Full Manual (PDF)
The above manual covers the following models: IPMIT300 / IPMIT350
No not at all.
All 3 IPmitter models boast a superb easy pairing method which means you can set up the IPmitter without needing a laptop or PC to set up its IP address, perfect for getting the job done more efficiently and without needing a dedicated IP technician to do the install.
Pairing on channel 100
1. Power both IPmitters, and leave to boot up for at least 3 mins. During boot up they will display a rotating segment [ _i]
2. On one IPmitter (client), press the F (function) button and "H" will flash [H 100]. Press the S (setting) button to change to [C 100].
3. The whole display will flash to indicate the settings have been saved, it will reboot (can take up to 3 mins) then the display will show [C036].
4. Now press the RST (reset) button for 1 second on both IPmitters [H 100] [C036].
The display will change to a P with a rotating segment whilst pairing [P __]. Pairing can take up to 5 minutes.
The display will show P and a value once paired [P0 10] [P0 12].
More information for the general public at our website: www.ipmitter.com
© 2023 Systemq.com, all rights reserved worldwide.