Main Banner
Wireless Bridges
Location
Home / IP CCTV / Wireless Bridges / IPmitter Wireless Access Points

IPmitter Wireless Access Points

IPmitter Wireless Access Points

Create speedy, dependable wireless access points for up to 90 devices.

IPmitter Dual Band Wireless Access Point

The IPmitter ceiling and wall access point (IPMIT100) boasts dual band technology and can simultaneously connect equipment to your LAN on both the 5.8Ghz and 2.4Ghz channels. **OFFER** Spend over £300 ex-vat on IPmitter branded products and get a free patch lead bundle worth £28!!

In Stock

Watch the full video on this superb product line...


Read more in our FAQs.

# Quick Links, Manuals & Product Documentation - IPmitter Range

Below are a list of product manuals and quick start guides covering our IPmitter wireless bridges and wireless access point range.

Dual Band Wireless Access Point - IPMIT100

Full Manual (PDF) / Full Manual (HTML)

Quick Start Guide (PDF) / Quick Start Guide (HTML)

The above manuals cover the following models: IPMIT100


Budget 48V PoE Wireless Bridges - IPMIT204/254

Full Manual (PDF) / Full Manual (HTML)

Quick Start Guide (PDF) / Quick Start Guide (HTML)

The above manual covers the following models: IPMIT204 / IPMIT254


Standard 48V PoE Wireless Bridges - IPMIT304/354

Full Manual (PDF) / Full Manual (HTML)

Quick Start Guide (PDF) / Quick Start Guide (HTML)

The above manual covers the following models: IPMIT304 / IPMIT354


Pro 48V PoE Wireless Bridges MK2 - IPMIT430/460/450

Full Manual (PDF) / Full Manual (HTML)

Quick Start Guide (PDF) / Quick Start Guide (HTML)

The above manual covers the following models: IPMIT430 / IPMIT460


Legacy

Budget 24V PoE Wireless Bridges - Full Manual (PDF)
The above manual covers the following models: IPMIT200 / IPMIT250

Standard 24V PoE Wireless Bridges - Full Manual (PDF)
The above manual covers the following models: IPMIT300 / IPMIT350

Pro 48V PoE Wireless Bridges MK1 - Full Manual (PDF) / Quick Start Guide (PDF)
The above manuals cover the following models: IPMIT400 / IPMIT450


Do I need a laptop or PC to pair up two IPmitters?

No not at all.

All 3 IPmitter models boast a superb easy pairing method which means you can set up the IPmitter without needing a laptop or PC to set up its IP address, perfect for getting the job done more efficiently and without needing a dedicated IP technician to do the install.

IPmitter wireless bridges LED display when pairing
How to Pair IPmitters

Pairing on channel 100

1. Power both IPmitters, and leave to boot up for at least 3 mins. During boot up they will display a rotating segment [ _i]

2. On one IPmitter (client), press the F (function) button and "H" will flash [H 100]. Press the S (setting) button to change to [C 100].

3. The whole display will flash to indicate the settings have been saved, it will reboot (can take up to 3 mins) then the display will show [C036].

4. Now press the RST (reset) button for 1 second on both IPmitters [H 100] [C036].

The display will change to a P with a rotating segment whilst pairing [P __]. Pairing can take up to 5 minutes.

The display will show P and a value once paired [P0 10] [P0 12].

My IPmitter is not pairing, what should I do?
1. Check the signal strength on the LED display at the Host and Client IPmitter. Between P-070 and P-095 is too low for transmission > Try the pairing process with the devices closer together.

2. Check the SYS light at the Host and Client IPmitter > If the SYS light is not lit then check your 48V PoE source or 12V DC source.

3. Check the WAN or LAN indicator Host and Client IPmitter > This will light up if a device connected and powered correctly. Please note this may not just be a power issue for the device connected but the cable connecting the IPmitter and the devices may be wired incorrectly or the cable may have a fault.

My IPmitter reads signal strength P-095, what does it mean?
The signal strength of P-095 shows they have not paired up correctly.

1. Check the pairing > Reset both IPmitters, holding the R (reset) button down on both IPmitters for 10 seconds. Once both units have booted back up, then try the pairing process again.

2. Between P-070 and P-095 is too low for transmission > Try the pairing process with the devices closer together.



More information for the general public at our website: www.ipmitter.com

Search
Login Status
Categories

© 2022 Systemq.com, all rights reserved worldwide.

Software: Kryptronic eCommerce, Copyright 1999-2022 Kryptronic, Inc. Exec Time: 0.057426 Seconds Memory Usage: 1.450897 Megabytes
Kryptronic