Time saving CAT5 plugs with unique open ended design, easy to see wire order. (Requires a RapidFit crimp tool)
The appearance of the RapidFit® plugs may not look too different to an ordinary RJ45 plug but that's about where the similarities end. The genius design of the RapidFit® plug is what sets it apart.
The RapidFit® plugs have a unique open ended design which has two huge benefits. Firstly it lets you push the cores straight through the plug. You no longer have to spend ages stripping and cutting each core to the correct length and hoping they make contact with the pins. Secondly, with the cores sticking out of the plug you can check to make sure they are all in the right order preventing mis-crimps.
Another unique feature is the teeth on the pins inside the plug. When crimped these teeth pierce the insulation on each core and make contact with the copper inside.
The plugs are available for CAT5 and CAT6 cables so you can use them on any job.
Note: The CON830s are for use with UTP CAT5 cable only. For UTP CAT6 crimps see order code: CON840.
|Type||Crimp On Plug||Crimp On Plug|
|Style||UTP CAT5 (8P8C)||UTP CAT5 (8P8C)|
|Packaging||Grip Seal Bag||10x Grip Seal Bags|
|Dimensions||(H) 13 x (W) 11.5 x (D) 23mm||(H) 13 x (W) 11.5 x (D) 23mm|
There's a RapidFit RJ45 plug for both CAT 5 and CAT6 cable in UTP or STP versions too.
Time saving RapidFit plugs designed for use with STP CAT5 cable. (Requires a RapidFit crimp tool)
Time saving CAT6 plugs with unique open ended design, easy to see wire order. (Requires a RapidFit crimp tool)
Time saving RapidFit plugs designed for use with STP CAT6 cable. (Requires a RapidFit crimp tool)
This great value tool is a must for any IP CCTV installer allowing you to shave hours off each week by making the swap to RapidFit over standard RJ45 plugs.
A heavier more robust tool than the TOO995, the Professional RapidFit Ratchet crimp tool has been designed for continued daily usage with longer moulded easy-grip handles.
© 2022 Systemq.com, all rights reserved worldwide.