An IP CAT5/6 joint box can be used to join two cable ends together. Itís much faster than crimping the ends and you can cut the cable shorter.
An IP CAT5/6 joint box can be used to join two cable ends together. It's much faster than crimping the ends and you can cut the cable shorter maximising system performance! Great when threading cables through small holes and re-joining where convenient.
Simply estimate a suitable location you can join the patch cable and then cut the cable at the appropriate length into two. Now thread the patch cable through the holes and route it so both cut ends now meet at a convenient location. Use an IP joint box IP-BOX005 to join the cables together.
It’s much faster than crimping the ends and you can cut the cable shorter maximising system performance!
Please Note: To insert the CAT5/6 cable you will need the TOO840 punch down tool.
|Use||CAT5 & CAT6|
|Dimensions||(H) 25 x (W) 48 x (D) 26mm|
Below you can view and download quick start guides and manuals for our Zip IP range of cameras.
IPCZIP Cameras - Full Manual
The above manual covers the following models:
IPCZIP530 / IPCZIP535 / IPCZIP570 / IPCZIP800 / IPCZIP815 / IPCZIP870 / IPCZIP880 / IPCZIP910 / IPCZIP920 / IPCZIP930
© 2022 Systemq.com, all rights reserved worldwide.