Very powerful 1Gbps 4 way switch that can supply up to 71W of power per port. Designed for higher load PoE CCTV equipment.
Very powerful 1Gbps 4 way switch that can supply up to 71W of power per port. Designed for higher load PoE CCTV equipment such as PTZs or you can use it to power other devices such as PoE extenders.
Because of the very high 71W output per port of this unit the power supply is external to the switch and supplied with it.
PoE switches allow data to flow seamlessly from one device to another and are an easy way to connect everything together. To make designing networks easier some devices such as IP cameras can actually be powered over the Ethernet cable, this method of powering is called PoE short for "Power over Ethernet".
Not just a distributor, they work in 2 directions firstly by taking a network connection input and distributing power across its 4 ports to connected IP cameras or devices but in reverse too by carrying the video signal from all the connected cameras back into a single network cable for reproduction elsewhere on the network.
|Max Port Load||71W|
|Power Connection||IEC C14 Socket (Kettle)|
|Use||Internal Use Only|
|Dimensions||(H) 28 x (W) 118 x (D) 95mm|
Great for smaller or domestic installs these 6 or 10 port switches can be connected directly to the NVR for a local system or networked via a router.
ScatterBox Gigabit PoE switches have been specifically tailored for powering and connecting IP CCTV cameras to a network thanks to their high speed capacity and high load capacity.
Add 30W of power into a network allowing PoE cameras to be added on to the cable run after it. Runs of 100M in and out of the device are easily achievable on a standard 100Mbps network.
© 2022 Systemq.com, all rights reserved worldwide.