A 5A wall mount PSU with adjustable 12V - 14.9V DC output and 4 way connection strip.
This is a great PSU to always have in the back of the van or at base. It has a superb 5A output that is spread across its built in 4 way junction box so you can neatly wire cameras directly to it. Each port has a 2A supply that will power even thirsty IR cameras and is fused to prevent over-voltage.
A really useful adjustment potentiometer allows voltage adjustment from 12V DC up to 14.9V DC that can help overcome issues with volt drop on long cable runs whilst on site. There' also a built in switch mode circuit which makes it run cool and efficiently.
The neat design has a kettle lead to input power and can be screwed to a wall or bolted to a rack thanks to a simple fixing lug. Its compact size makes it easy to install behind other equipment such as DVRs whether rack mounted or in a DVR enclosure such as the KitVault.
Note - The potentiometer adjusts all outputs not individual ones.
|Input Voltage||90V - 264V AC|
|Output Voltage||12 - 14.9V DC|
|Output Per Port||2A Max|
|Output Connection||Screw Terminals|
|Mains Connection||IEC C13 Plug (Lead Supplied)|
|Dimensions||(H) 163 x (W) 53 x (D) 33mm|
The above manual covers the following models:
CON370 / CON370K / CON371 / CON371K / CON375 / CON376 / CON377 / CON378 / BULK-CON370
Superb little plug in PSUs use the latest 'switched mode electronics' for high efficiency, low heat and a clean regulated 12V output.
Ideal for commercial installers, these wall-mount power supplies are housed in a tough metal case with a key lock to prevent unauthorised access.
How it works: The 240V AC input is converted to multiple 12V DC outputs (9 or 17) with a total current output of 10 or 20 Amps, depending on the model.
Higher loading of 2A and 5A means these compact, high quality in-line PSUs can power more demanding products like DVRs or multiple cameras in one go.
© 2023 Systemq.com, all rights reserved worldwide.