These CVBS baluns are ideal for transmitting analogue CCTV footage up to 100m over CAT5 and a real bargain whilst stocks last.
Baluns contain small signal transformers that are specially tuned to match the cables impedance and convert the unbalanced signal to a balanced one. PASSIVE baluns just have the transformers and very little else in them.
ACTIVE baluns have extra electronic circuits used to amplify the signals helping prevent losses and also filtering out unwanted noise.
On some PASSIVE baluns that carry video and data signals, the data "terminals" do not go through a transformer or any other electronics and are a direct electrical connection to the CAT5 cable. These &"terminals" can be useful for lots of purposes including sending low voltage (5 or 12V) from one balun to another.
|No of Video Inputs||1|
|Video Input Connection||BNC Plug (Male)|
|CAT5 Output Connection||Screw Down Terminals|
|Max TX Distance||100m|
|Video Bandwidth||8 MHz|
|Power||Passive (Not Required)|
|Pack Size||1 Pair|
|Dimensions||(H) 25 x (W) 15.5 x (D) 31.5mm|
These superb little Baluns are pocket rockets when it comes to sending HD video signals up to 4K down either CAT5 or 6 cable!
Pair of in-line 1ch passive baluns can transmit video up to 100m over CAT5. Baluns can be snapped together forming 1 block.
You can send power up to a 100m at maximum current of 100mA as well as the video with this balun pair simply connect one balun to the camera's video and power and the other to a DVR and PSU
1ch Passive video balun with built in ground loop isolator, solves 2 problems at once.
This active balun range is ideal for transmitting analogue CCTV footage up to 2Km over CAT5!
© 2022 Systemq.com, all rights reserved worldwide.