Location
Home / Signal / Baluns / CVBS (Analogue) Baluns / GP-BAL106 - 1Ch Passive (CVBS) Baluns

1Ch Passive (CVBS) Baluns

Pair Of In-line 1ch Passive Baluns

... transmit up to 100m

  • BNC Connection
  • Compact
  • 'Snap' Together Design
  • Spring Clamp Terminals
  • Transient Suppression
  • Up To 100m Range

Pair of in-line 1ch passive baluns can transmit video up to 100m over CAT5. Baluns can be snapped together forming 1 block.

An account is required to purchase this item. Use the buttons below to login to an account, or to create an account.

Learn More

Baluns contain small signal transformers that are specially tuned to match the cables impedance and convert the unbalanced signal to a balanced one. PASSIVE baluns just have the transformers and very little else in them.

ACTIVE baluns have extra electronic circuits used to amplify the signals helping prevent losses and also filtering out unwanted noise.

On some PASSIVE baluns that carry video and data signals, the data terminals do not go through a transformer or any other electronics and are a direct electrical connection to the CAT5 cable. These +terminals can be useful for lots of purposes including sending low voltage (5 or 12V) from one balun to another.

The innovative 'Snap' together design allows multiple baluns to be connected to one and other forming 1 block for a neat installation. Connecting the baluns in this way also saves time in the future as you will have an organised installation rather than mass of wires.

The BAL106s feature a BNC plug for connecting to a DVR or cameras, spring clamp terminals for quickly connecting a twisted pair and transient suppression.Baluns contain small signal transformers that are specially tuned to match the cables impedance and convert the unbalanced signal to a balanced one. PASSIVE baluns just have the transformers and very little else in them.

ACTIVE baluns have extra electronic circuits used to amplify the signals helping prevent losses and also filtering out unwanted noise.

On some PASSIVE baluns that carry video and data signals, the data terminals do not go through a transformer or any other electronics and are a direct electrical connection to the CAT5 cable. These +terminals can be useful for lots of purposes including sending low voltage (5 or 12V) from one balun to another.

The innovative 'Snap' together design allows multiple baluns to be connected to one and other forming 1 block for a neat installation. Connecting the baluns in this way also saves time in the future as you will have an organised installation rather than mass of wires.

The BAL106s feature a BNC plug for connecting to a DVR or cameras, spring clamp terminals for quickly connecting a twisted pair and transient suppression.Baluns contain small signal transformers that are specially tuned to match the cables impedance and convert the unbalanced signal to a balanced one. PASSIVE baluns just have the transformers and very little else in them.

ACTIVE baluns have extra electronic circuits used to amplify the signals helping prevent losses and also filtering out unwanted noise.

On some PASSIVE baluns that carry video and data signals, the data terminals do not go through a transformer or any other electronics and are a direct electrical connection to the CAT5 cable. These +terminals can be useful for lots of purposes including sending low voltage (5 or 12V) from one balun to another.

The innovative 'Snap' together design allows multiple baluns to be connected to one and other forming 1 block for a neat installation. Connecting the baluns in this way also saves time in the future as you will have an organised installation rather than mass of wires.

The BAL106s feature a BNC plug for connecting to a DVR or cameras, spring clamp terminals for quickly connecting a twisted pair and transient suppression.

Specifications
FAQ

You Might Also Like...

1Ch 4K Passive Pigtail Balun (4K, HD & CVBS)

These superb little Baluns are pocket rockets when it comes to sending HD video signals up to 4K down either CAT5 or 6 cable!

In Stock
Passive CVBS Baluns - Whilst Stocks Last

These CVBS baluns are ideal for transmitting analogue CCTV footage up to 100m over CAT5 and a real bargain whilst stocks last.

In Stock
1Ch Passive Pigtail  (CVBS & Power) Baluns

You can send power up to a 100m at maximum current of 100mA as well as the video with this balun pair simply connect one balun to the camera's video and power and the other to a DVR and PSU

In Stock
1Ch Passive Pigtail (CVBS) Balun w/ Ground Loop Isolator

1ch Passive video balun with built in ground loop isolator, solves 2 problems at once.

In Stock
Wall-Mount Active (CVBS) Balun Receivers

This active balun range is ideal for transmitting analogue CCTV footage up to 2Km over CAT5!

In Stock
Search
Login Status
Categories

© 2022 Systemq.com, all rights reserved worldwide.

Software: Kryptronic eCommerce, Copyright 1999-2022 Kryptronic, Inc. Exec Time: 0.054833 Seconds Memory Usage: 1.691483 Megabytes
Kryptronic