Time saving CAT6 plugs with unique open ended design, easy to see wire order. (Requires a RapidFit crimp tool)
The appearance of the RapidFit® plugs may not look too different to an ordinary RJ45 plug but that's about where the similarities end. The genius design of the RapidFit® plug is what sets it apart.
The RapidFit® plugs have a unique open ended design which has two huge benefits. Firstly it lets you push the cores straight through the plug. You no longer have to spend ages stripping and cutting each core to the correct length and hoping they make contact with the pins. Secondly, with the cores sticking out of the plug you can check to make sure they are all in the right order preventing mis-crimps.
Another unique feature is the teeth on the pins inside the plug. When crimped these teeth pierce the insulation on each core and make contact with the copper inside.
The plugs are available for CAT5 and CAT6 cables so you can use them on any job.
Note: The CON840s are for use with UTP CAT6 cable only. For UTP CAT5 crimps see order code: CON830.
|Type||Crimp On Plug||Crimp On Plug|
|Style||UTP CAT6 (8P8C)||UTP CAT6 (8P8C)|
|Packaging||Grip Seal Bag||10x Grip Seal Bags|
|Dimensions||(H) 13 x (W) 11.5 x (D) 23mm||(H) 13 x (W) 11.5 x (D) 23mm|
There's a RapidFit RJ45 plug for both CAT 5 and CAT6 cable in UTP or STP versions too.
This great value tool is a must for any IP CCTV installer allowing you to shave hours off each week by making the swap to RapidFit over standard RJ45 plugs.
A heavier more robust tool than the TOO995, the Professional RapidFit Ratchet crimp tool has been designed for continued daily usage with longer moulded easy-grip handles.
© 2023 Systemq.com, all rights reserved worldwide.