Home / IP CCTV / LAN Cable & RJ45 / RapidFit RJ45 Plugs & Tools / TOO995 - Contractor's RapidFit RJ45 Crimp Tool

Contractor's RapidFit RJ45 Crimp Tool

Contractor's RapidFit Tool

... cuts & strips cable then crimps too!

  • Fits RapidFit RJ45s
  • Cuts & Strips Cable Too
  • Easy to See Wire Order
  • Crimps & Cuts in 1 Action
  • Ratchet Handle so Less Force Required
  • Great Value
  • Auto Release Handles
  • No Worries on Mis-crimps
  • Suits Rapidfit RJ45 CAT5/6 Plugs
  • Extra Cutter for Round Cables

This great value tool is a must for any IP CCTV installer allowing you to shave hours off each week by making the swap to RapidFit over standard RJ45 plugs.

An account is required to purchase this item. Use the buttons below to login to an account, or to create an account.

Learn More

This great value tool is a must for any IP CCTV installer allowing you to shave hours off each week by making the swap to RapidFit over standard RJ45 plugs.

The time saving is well worth the small investment of less than £20 for this special crimp tool and the RapidFit RJ45 plugs save money too at less than 10p each!

The Rapidfit Range is a great time-saving family of products for any IP CCTV or Network engineer as it can shave minutes off your day every time you fit an RJ45 connector.

It includes a full range of RJ45 plugs suitable for CAT5 and CAT6 that have a unique open ended design which has two huge benefits. Firstly it lets you push the cores straight through the plug. You no longer have to spend ages stripping and cutting each core to the correct length and hoping they make contact with the pins.

Secondly with the cores sticking out of the plug you can check to make sure they are all in the right order preventing mis-crimps. Another unique feature is the teeth on the pins inside the plug. When crimped these teeth pierce the insulation on each core and make contact with the copper inside.

On appearance the RapidFit plugs may not look too different to an ordinary RJ45 plug but that's about where the similarities finish. The genius design of the RapidFit plug is what sets it apart making a Rapidfit Crimp Tool like this one an essential for an IP engineer’s toolbox.

There are 2 RJ45 RapidFit tools available, the Contractor’s RJ45 RapidFit Crimp Tool (this one) perfect choice if you’re fitting IP CCTV every week as it is low cost and has a ratchet handle design making applying pressure to the crimp really easy.

OR if you are fitting RJ45 plugs day in day out we recommend the Professional tool (TOO998) which costs a little more but has a longer ergonomically designed handle that makes applying pressure a little easier on the hands and has an overall higher build quality.

How It Works

You Might Also Like...

RJ45 Ratchet Crimp Tool

For crimping RJ45 (8p8c) plugs onto cable. Can also be used for RJ11 (6p6c) and RJ12 (6p6c) plugs, with built-in wire cutters & stripper.

In Stock
Professional RapidFit RJ45 Crimp Tool

A heavier more robust tool than the TOO995, the Professional RapidFit Ratchet crimp tool has been designed for continued daily usage with longer moulded easy-grip handles.

In Stock
Login Status

© 2023 Systemq.com, all rights reserved worldwide.

Software: Kryptronic eCommerce, Copyright 1999-2023 Kryptronic, Inc. Exec Time: 0.070308 Seconds Memory Usage: 1.541306 Megabytes