<< Click to Display Table of Contents >> Navigation:  »No topics above this level« Introduction

The Standard IPmitters have a data transfer rate of 450Mbps and uses the 5.8GHz band.

 

Its faster data transfer rate means it can link bigger IP CCTV systems together more effectively than the budget one.

 

The IPmitter works in 2 modes with LED pairing, Repeater mode and AP mode, the Host acts as the Access point (AP) and the client sets up as the repeater to provide a WiFi Bridge between the two.

 

IPMIT304 Can be powered using 48 PoE (Not supplied) or can be powered using 12V DC (Not supplied).