Park action (default position) will have the PTZ go back to a preset position, tour or pattern after no manual control after a specified time period has ended.
Power action can also be configured to have the PTZ do the same when the PTZ boots up, after a power loss.
Set in PTZ OSD Menu
1.Enter the PTZ controls.
2.Position the camera at the start the record pattern sequence.
3.Select the <GO TO/ Call preset > Preset 95 .
4.The Main Menu will then display on the screen. Note that the "&" character needs to be moved into editing mode by moving the right arrow and left to exit.
Go down to System Setting > then press IRIS + / right.
5.Go to Movement Control menu and then press IRIS + / right.
6.Set the below;
Park Act Time from NO to 1-255 Seconds.
Park Act from NO to Preset 1-8 / Patrol 1-8 / Pattern 1-8 / Auto Scan / AB Scan.
Power Act from NO to Preset 1-8 / Patrol 1-8 / Pattern 1-8 / Auto Scan / AB Scan.
7.Press the IRIS- to exit out of menu.