<< Click to Display Table of Contents >> Navigation:  Event and Alarm > Set Motion Detection

 

It helps to detect the moving objects in the detection region and trigger the linkage actions.

 

Steps

1. Go to Configuration → Event → Basic Event → Motion Detection.

2. Select the channel No.

3. Check Enable Motion Detection.

4. Optional: Highlight to display the moving object in the image in green.

1) Check Enable Dynamic Analysis for Motion.

2) Go to Configuration → Local.

3) Set Rules to Enable.

5. Select Configuration Mode, and set rule region and rule parameters.

– For the information about normal mode, see Normal Mode.

– For the information about expert mode, see Expert Mode.

6. Set the arming schedule and linkage methods. For the information about arming schedule settings, see Set Arming Schedule. For the information about linkage methods, see Linkage Method Settings.

7. Click Save.