<< Click to Display Table of Contents >> Navigation: Event and Alarm > Set Motion Detection > Normal Mode |
You can set motion detection parameters according to the device default parameters.
Steps
1. Select normal mode in Configuration.
2. Set the sensitivity of normal mode. The higher the value of sensitivity is, the more sensitive the motion detection is. If the sensitivity is set to 0, motion detection and dynamic analysis do not take effect.
3. Click Draw Area. Click and drag the mouse on the live video, then release the mouse to finfish drawing one area.
Figure 6-1 Set Rules
Stop Drawing Stop drawing one area.
Clear All Clear all the areas.
4. Optional: You can set the parameters of multiple areas by repeating the above steps.