<< Click to Display Table of Contents >> Navigation: Event and Alarm > Set Motion Detection > Expert Mode |
You can configure the motion detection parameters of day/night switch according to the actual needs.
Steps
1. Select expert mode in Configuration.
2. Set parameters of expert mode.
Day/Night Switch
OFF: Day/night switch is disabled.
Day/Night Auto-Switch: The system switches day/night mode automatically according to environment. It displays colored image at day and black and white image at night.
Day/Night Scheduled-Switch: The system switches day/night mode according to the schedule.
It switches to day mode during the set periods and switches to night mode during the other periods.
Sensitivity
The higher the value of sensitivity is, the more sensitive the motion detection is. If the sensitivity is set to 0, motion detection and dynamic analysis do not take effect.
3. Select an Area and click Draw Area. Click and drag the mouse on the live video, then release the mouse to finish drawing one area.
Figure 6-2 Set Rules
Stop Drawing Finish drawing one area.
Clear All Delete all the areas.
4. Optional: Repeat the above steps to set multiple areas.