<< Click to Display Table of Contents >> Navigation: Configuration > Getting Started |
Image processing and analysis is all done in the camera, ANPR data is then sent to this software for addtional processing and/or storage. For this to happen, the camera must be configured before attempting to setup the ANPR Command Centre software.
These links provide document how to setup a camera ..
https://systemq.com/PDF/manual/xROBOPCZ22.pdf
https://systemq.com/PDF/manual/xROBOPMZ50.pdf
Crucially, these minimum steps must be performed ..
•Device Activation - See the camera manual
•NTP - See the camera manual
•Network - See the camera manual
•ANPR - Basic settings - See the camera manual
•Alarm - Event Server - see Alarm Event Server