The PD (Pedestrian Detection) feature lets you monitor the camera's image for pedestrians, vehicles or both. You can even tell the recorder to watch for moving or stationary subjects depending on your need.
Camera
Lists all compatible AI cameras on the recorder.
Pedestrian Detection Configuration
You can configure the parameters for detection to get more accurate results as shown in the PD Setup section by clicking the Cog icon. You will need to define the detection area so that the recorder knows where to monitor.
Please note that PD will only be enabled whenever smart detection features are active as specified in the Smart Schedule.
Enabling PD
To enable or disable PD for each camera just tick or untick the Switch check box.
Alarm Handling
Clicking the Alarm button will open the Alarm Handling screen where you can set what actions the recorder will take when a pedestrian detection alert is triggered. For more information on setting up alarm handling see the Alarm Menu - Smart section.
Saving Changes
When you are happy with the current settings click the Apply button to save your changes. If you exit the window without saving any changes will be lost.