In the Settings Save/Load sub-menu you can save the recorder's current settings as a backup or to load onto another Zip recorder. You can also load previously saved settings from the same recorder or another Zip recorder.
This feature is typically used when you have multiple recorders on the same site or over multiple sites. It allows you to configure one recorder as required and then load those settings onto your other recorders rather than having to repeat the setup process again and again.
Saving Settings
To save the settings from your recorder follow these simple steps:
1.Insert a USB backup device into your recorder.
2.Click the Save Settings button.
3.Choose where you want to save your settings file and click OK. For more information saving to a USB device see the Backup section.
4.Enter the admin user password for authorisation.
Settings files will be named as the recorder's serial number followed by _Settings.
Loading Settings
You can load previously saved settings from your recorder or another Zip recorder as long as they are the same model and on the same firmware version. Just follow these simple steps:
1.Insert the USB backup device which contains the settings file into your recorder.
2.Click the Load Settings button.
3.Navigate to the settings file, select it and click OK.
4.Enter the admin user password for authorisation.
5.The recorder will then reboot and start up with the new settings.