HDMI Extender Over Co-ax

ScatterBox
SKU:
HDM130
Availability:
Usually ships the same or next day
(No reviews yet)

Lifesaver for Monitors in a More Remote Location

  • 1080p HD Quality
  • Sold in TX/RX Pairs
  • Up to 100m Co-ax Run
  • Low Voltage 12V DC - PSUs Supplied
This pair of HDMI extenders are a superb problem solver particularly on legacy CCTV installations where you need to run an HDMI signal but only have an RG59 Co-ax in place.
Current Stock:

This pair of HDMI extenders are a superb problem solver particularly on legacy CCTV installations where you need to run an HDMI signal but only have an RG59 Co-ax in place.

Ideal when you need to get a DVR output to a monitor but have no cable route for an additional HDMI lead or it is just too far for an HDMI signal to perform.

RG59 has been the standard CCTV cable for many years so this pair can easily make use of an existing run and with HDMI leads having limited performance over longer distances this is a great way to achieve up to a 100M run!

Supporting up to 1080P real-time, the pair even have a reverse IR control facility to allow control over your DVR or other devices from another room or part of the building. Each unit measures just 80x45x22mm so they can easily be fixed behind other equipment for ease of installation.

Note: This unit does not support Dolby Digital or DTS sound, as the HDM130 only supports PCM. Consult the instruction manual or manufacturer of the source device to adjust to PCM audio transmission.

  HDM130
Input HDMI
Max Cable Input 10m
Output BNC (Co-ax)
Max Cable Output 100m
Audio Outputs PCM
Power 12V DC
Current Tx - 680mA / Rx - 420mA
Power Connection 2.1mm DC Socket
PSU x2 Supplied
Build Metal
Dimensions (H) 45 x (W) 80 x (D) 22mm
Device:
Extender
Type:
HDMI