Open Box: 1Ch Passive TVI Balun Pair Video, Power, Data

Usually ships the same or next day
(No reviews yet)

Send Video, Power & Data Or Audio - Transmit 200m Down An RJ45 Cable

  • Pigtail BNC Connection
  • RJ45 Socket
  • Send DC Or AC Power
  • Up To 200m Range

Pair of 1 channel passive baluns which allow your to transmits video, data and DC or AC power down an RJ45 cable.

Current Stock:

Baluns contain small signal transformers that are specially tuned to match the cables impedance and convert the unbalanced signal to a balanced one in fact PASSIVE baluns just have the transformers and very little else in them.

On some PASSIVE baluns that carry video and data signals, the data “terminals” do not go through a transformer or any other electronics and are a direct electrical connection to the CAT5 cable. These
“terminals” can be useful for lots of purposes including sending low voltage (5 or 12V) from one balun to another.

The new ZENDit range of baluns have built in QUAD technology that make them compatible with both analogue and HD (TVI, CVI & AHD) video signals.

The BAL810 pairs feature a a pigtail lead for connections. One with a  BNC plug & DC plug for connection to a camera and an RJ45 socket for a plug in connection to CAT5, the other with a BNC plug and DC socket for connection to a DVR and PSU.

You can send power up to a 100m at maximum current of 100mA as well as the video with this balun pair simply connect one balun to the camera's video and power and the other to a DVR and PSU.

No of Video Inputs 1
Video Input Connection BNC Plug (Male)
CAT V Output Connection RJ45 Socket
No of Video Outputs 1
Max TX Distance 200m
No of Audio Inputs 1
Audio Input Connection Bare Wires
No of Audio Outputs 1
Audio Input Connection Bare Wires
No of Data Inputs 1
Data Input Connection Bare Wires
No of Data Outputs 1
Data Output Connection Bare Wires
Video Bandwidth 60 MHz
Power Passive (Not Required)
Pack Size 2
Dimensions 210 x 28 x 20mm