Open Box: Single IPmitter Budget Wireless Bridge

IPmitter
SKU:
GP-ZS-IPMIT204
Availability:
Usually ships the same or next day
(No reviews yet)

Link Remote Buildings to Your Network Without Cables !

  • Wireless LAN Connectivity
  • Easy Pair Setup
  • Dual 12V & 48V PoE
  • Bridge & Access Modes

Our budget IPmitters have a data transfer rate of 300Mbs, using the 2.4Ghz band, this is aimed at cost conscious installations.

Current Stock:

If you want to link two locations together on a network where cabling is impossible or not economic then WiFi Bridges are a great choice. WiFi Bridges allow you to link IP from one building to another, or simply to link your garden office to your main house for internet or CCTV.

On many installations you will often find that the CCTV has to cover areas that are hard to cable, typically where the main CCTV system is in one building but other satellite buildings also need to be covered by CCTV.

So how do you connect IP CCTV systems in a separate building together?

One option is simply to cable them, but this could involve digging trenches or running overhead catenary wires. This can be both costly and disruptive which is where a wireless IP link is by far the most attractive solution.

The IPmitter wireless links are far more cost effective than running cables and much faster to deploy so they are more often than not the preferred choice for most installers where cabling is just too difficult. Clearly a proper "cabled" IP connection will always be faster in data transfer and also more reliable than a wireless one but where this is not practical or the cost is too high, a wireless "bridge" is a great solution.

As most fellow CCTV professionals want a simple and reliable solution to transmitting IP signals from building to building we have designed and launched the IPmitter.

The IPmitter range currently has 3 models for linking one building/location to another.

All 3 IPmitter models boast a superb easy pairing method which means you can set up the IPmitter without needing a laptop or PC to set up its IP address, perfect for getting the job done more efficiently and without needing a dedicated IP technician to do the install.

Our IPmitter bridges are available in the choice of Budget, Standard and Pro models and also in either black or white cases so they look great in any location. All three models are 48V PoE or you can power them with a standard 12V PSU if you prefer.

Each of the IPmitter bridges has a maximum and recommended transmission range. The maximum range is a distance we have tested the IPmitter at and it functions correctly. This is with direct line of sight with no obstacles and in good weather conditions. Because rain, snow and mist will all attenuate the signals between the IPmitters we include a "recommended" distance where we take into account "typical" UK weather. Clearly in severe weather conditions that may for example block out your SKY reception, the IPmitter would also suffer. If you have an obstacle in the way of the IPmitter the distance again will be reduced depending on how much signal the obstacle blocks.

  IPMIT204B/W
Units Single
Frequency 2.4Ghz
Wireless Data Speed 300Mbps
12V Input Option Yes (300mA)
LAN Port 1 Speed 10Mbs / 100Mbs
LAN Port 2 Speed 10Mbs / 100Mbs
Max Tx Distance 700m (Recommend 350m)
Wireless Standard IEEE802.11B/G/N
Easy Pair Technology Yes
Support 1 - 1 Yes
Support 1 - Many Yes
Modes Access Point / Bridge / Repeater
Power 48V PoE / 12V DC
Mounting Wall Or Pole (Not Supplied)
Dimensions (H) 165 x (W) 88 x (D) 56mm