Up The Co-ax OSD Controller

The REM088 simply connects 'in-line' between the camera and the DVR or monitor. It’s a very convenient way to access the camera’s menu system as you can do this after the camera is installed and fine tune the camera whilst sitting comfortably next to the DVR. It sends the control signals through the video co-ax so you don’t need any additional cables. Comes with a BNC plug and socket fly-lead so the co-ax cable from the camera can be connected to the controller which is then connected to the DVR.

Note - REM088 will not work through Baluns or CAT5.

Note - This remote will only work with CVBS (Analogue) format, Pelco-C (up-the-coax) control. It will also not work through Baluns or CAT5.