When installing it is good practice to keep the MegaMitters away from another transmission devices including other MegaMitters. This is because interference can cause poor performance which may result in intermittent loss of signal or non operation.
The standard antenna that the MegaMitters are supplied with is called an “Omni-directional” antenna, this means it transmits in “all” directions.
So when two transmitters are close to each other they will be transmitting signals at each other as well as the receiver. |
|
When using multiple pairs, keep the transmitters and receivers spaced apart. A spacing of 1-2 metres is required between each transmitter, and the same between each receiver.
It is recommended to use no more than 4 pairs per site to minimise any chance of cross interference.
Don't install two transmitters close together with omni directional antennas, as the signal can cause distortion and this can overwhelm the transmission causing loss of signal.
Keep the MegaMitters at least 1-2 metres apart and add directional antennas. |
|
