<< Click to Display Table of Contents >> Navigation:  »No topics above this level« Connections & Wiring

 

Connect the PTZ and your control equipment (DVR and/or keyboard) on a test bench setup first before installing the PTZ on site in position.

 

This ensures the PTZ is powering up correctly, the video, movement and control works correctly with your recorder or keyboard.

 

This can potentially save time on site during install in case of a wiring issue or fault on site.

 

The PTZM600 has pan-tilt-zoom telemetry control through either the RS485 cable or up the co-ax using the coaxitron facility.