Surface Mount Mag Locks

The ACC510 is a smart 5 wire mag lock which means there are 2 wires for connecting the power and 3 extra wires to indicate the door status (N/O, COM, N/C). These additional wires can be connected to a buzzer or light for example to produce a visible or audible alert when a door is opened. This could even be wired into a CCTV system to start a camera recording.

The ACC510 features a built-in adjustable delay which can be set from 0 to 8 seconds to keep the door unlocked for up to 8 seconds after power is restored.

Magnetic locks are an efficient method of adding secure access control to a door. By using them in conjunction with one of our exit buttons or wireless key fobs you can limit access to almost any door.

This could be a push to exit button allowing staff to leave through a security door while preventing unauthorised access from the outside or a wireless key fob for secure keyless entry.

An electromagnetic lock works by holding the door in place as long as there is power being supplied. You would connect the control device and power to the lock via an access control panel or relay so that the power can be cut when triggered. When powered up again the lock will re-engage.

Our Handy Rascal relays are ideal for use with our electronic locks as they add extra flexibility and functionality. The HRM100 1ch opto isolating relay would cut power to the lock for as long as the exit button is pressed. To have the door stay open for a short while a HRM200 delay on-off relay could be used to cut power to the lock for up to 20 seconds. For a more advanced solution you might consider using the HRM250 10 function relay. As well as being able to set how long the lock's power is cut for you can also specify a time delay between pressing the exit button and the power being cut. This allows for installations where the exit button isn't situated next to the door.

When it comes to mounting the ACC510 you have 3 options for ultimate flexibility. For outward opening doors the built-in mounting plate supplied can be used to fix the mag lock to the underside of the door frame. There is a Z L bracket available for inward opening doors (ACC505) and we even have a U shaped bracket for securing frameless glass doors (ACC502).

For a less exposed installation take a look at our ACC512 mortice mount mag lock.